GT-80WD
This is a wireless motorized slider, you can use the included Bluetooth remote control
or down loadable application for remote programming and control. The motorized slider
track is driven by a carbon fiber track and belt. The Bluetooth controller allows you to
control and program the slider for various movements. The system supports real-time
video shooting and time-lapse shooting, with multiple key frame positions for each
movement. PTZ has a built-in bubble level, so you can check if the camera is level.
The built-in independently adjustable feet allow you to adjust the position and level of
the slider
Carbon Fiber Slider
Smooth mute
App controlled
Automatic trip
Time-Lapse Shooting
Adjustable Legs
Compatible with all cameras
Stable and Anti-Shake
Incline support up to 45° and 2.5 kg
Rutschfest
Light to wear
Off-line working
Automatic trip
Set the start and end points at will. Set the motor torque at will. Slip speed (1% -100%)
Slip interval (0.1-999.9) stoptime (0.1-999.9) photo Number (1- 1000) auto loop
Time-Lapse Shooting
After setting the key points,you can enter the”Time Lapse Setting”, then set the various parameters you need.You can set various parameters for time-lapse shooting directly on the remote control, no need for another remote.
Slip speed:1%-100% Slip interval:0.1 -999.9 Stop-time:0.1-999.99 Photo number :1 - 999 Auto loop：Yes or No If you want the camera platfrom pause at every ABCD keyframes,and you should set A as the start point,D as the end point.
Wireless APP Control
The GVM slider with APP control gives you the convenience to operate the camera slider from distance and set the parameter you want for the camera slider, Compatible manual mode, and auto mode at the same time.
When shooting time-lapse, the shooting time and the number of photos can be calculated intelligently, so that users can fully grasp the shooting index.
After adjusting the time-lapse parameters ,the APP control can be used offline to save more power.
It can work offline 24 hours to make your shooting easier.
